ILX LIGHTWAVE OMH-6727B CALIBRATION and ILX LIGHTWAVE OMH-6727B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE OMH-6727B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Sensor?
Shop for Comparable Products on our  used Optical Power Sensor page or new Optical Power Sensor page

 
   ILX LIGHTWAVE OMH-6727B   Description / Specification:    
ILX LIGHTWAVE OMH-6727B 950 to 1650 nm InGaAs Optical Power Sensor Module

The ILX OMH-6727B InGaAs Power/ Wavehead provides the flexibility to easily and accurately measure the optical power and wavelength of laser sources in the near infrared spectrum. These products incorporate ILX’s unique integrating sphere-based power and wavelength measurement capability. The OMH-6727B allows free-space power and wavelength measurement from 950 to 1650nm, up to 1W.
Specifications.

Wavelength Measurement.
Wavelength Range: 950 to 1650 nm.
Accuracy: ±1 nm.
Detection (minimum power required): -20dBm.

Power Measurement.
Wavelength Range: 950 to 1650 nm.
Power Range: --0 to +30 dBm.
Damage Threshold: +37 dBm.
Accuracy: ±5.0%.
Entrance Aperture: 6mm.
Sensor Type: InGaAs.
Noise: 5nW p-p (typical).
Temperature Coefficient: -0.1%/C (typical).



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your ILX LIGHTWAVE OMH-6727B CALIBRATION and/or ILX LIGHTWAVE OMH-6727B 950 to 1650 nm InGaAs Optical Power Sensor Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: